Adwanced PCB layout course Leeson 4 Length Matching

[robertferanec]

Honestly, I often do not look at the numbers in the bar as sometimes they may show weird things. Is the length matching done from a correct rule? Is not that somehow confused with "within " differential pair rule? I would try to disable the rules and enable them one by one and try them or I would try to length match it based on the numbers in the first pictre and see what would happen with the bar after everything should be length matched correctly

[Eduard]

Hi Fedevel Academy,

I have a quastion concerning APLC L4-02.
During this activity as i understand i should length match DIFF100 and ENET differential pairs within the pair and group. For example in DRAM_BANK0 that 11 nets should have equal signal length. As we can see in this first picture below i should length match this diff pair to reach length equal 17.7mm. But i can't reach that value cause as you can see in the second picture i sould length match iup to 68mm and it's not rigth. M.b. i am douing something wrong or i sould change rules?
And i would like to say that length within the pair is equal to each other.




Can you please explain to me what should i do?

Best regards,
Eduard