Announcement

Collapse
No announcement yet.

Help needed - SMPS design

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help needed - SMPS design

    Hello there,

    It's my first attempt at designing SMPS. I have studied the datasheet for LT8582, LT3045-1, and LT3094 and came up with those two:

    Analog
    Click image for larger version

Name:	LT8582 analog supply.png
Views:	20
Size:	24.3 KB
ID:	19839

    Digital
    Click image for larger version

Name:	digital ps lt8582.png
Views:	20
Size:	23.0 KB
ID:	19840

    The idea is to have a small PCB with both circuits to power up my DAC from USB type C PD input.

    The analogue power supply is meant to be +/-15V, so half of the LT8582 works as a boost regulator (5V to 16,5V), another one as an inverting boost (5V to -16,5V). The next step is the LT3045-1 and LT3094 LDOs. they are supposed to work with minimal dropout, being in LT8582 feedback with their VOIC pins.

    Digital is two LT8582 SEPIC regulators that are feeding LT3045-1. LDOs are also using VOIC for the lowest dropout.

    I would greatly appreciate it if somebody can verify those schematics before I start designing the PCB. What stackup are you recommending with this one? 2 layers? 4 layers SIG-GND-GND-SIG?
Working...
X