| FORUM

FEDEVEL
Platform forum

EMI simulation

barismetin , 07-26-2019, 11:07 AM
Hi everyone, I have PCB design in Altium. I would like to do some EMI simulation on my design. What is the best way to do it? I am open to any recommendation. Thank you.
robertferanec , 07-30-2019, 02:56 AM
I am also curious to see any suggestions? Maybe what software, how to start, what to focus on .... interesting topic.

But I believe it is not so simple and it may be just easier faster and cheaper to go to a test house. Of course, depends on what is on the board.
barismetin , 07-30-2019, 04:26 PM
Yeah true Robert, I agree it is really hard to simulate all scenarios but so far CST is the best software I found
anovickis , 08-05-2019, 05:50 PM
I'm assuming you want to simulate some high speed channels for loss/impedance match, or are you looking for RF fields from clocks or other ?


barismetin , 08-05-2019, 05:56 PM
I am trying to simulate EMC on PCB, I would like to measure far-field radiation from PCB using simulation software
anovickis , 08-06-2019, 11:41 AM
SiWave/HFSS/ANSYS -> https://www.ansys.com/products/electronics/ansys-hfss
Hyperlynx/Mentor -> https://www.mentor.com/pcb/hyperlynx/full-wave-solver/
nimbic/mentor -> https://www.mentor.com/company/news/...cquires-nimbic
ADS/agilent -> https://www.keysight.com/en/pc-12971...?&cc=US&lc=eng
sonnet -> http://www.sonnetsoftware.com/
cst / dassault ->
https://www.3ds.com/products-service...-studio-suite/
simbeor/simberian -> http://simberian.com/SimbeorOverview.php
magus --> http://www.antennamagus.com/
clarity/cadence ->
https://www.cadence.com/content/cadence-www/global/en_US/home/tools/system-analysis/em-solver/clarity-3d-solver.html
xftd / remcom ->
https://www.remcom.com/xfdtd-3d-em-simulation-software/





Bring a wheelbarrow of gold, then when you get the empty wheelbarrow back, send a second one for the computer farm you will need


And some open source
site dedicated to the electromagnetic characterization of tridimensional structures



Comments:
barismetin, 11-14-2019, 12:25 PM
thank you so much
robertferanec , 08-07-2019, 12:03 AM
Bring a wheelbarrow of gold, then when you get the empty wheelbarrow back, send a second one for the computer farm you will need


​Very nice list! Thank you @anovickis
JodyMusto , 08-10-2020, 10:18 AM
I need to reproduce EMI Effect on one topology.(DDR SDRAM or SDRAM geography : 8 - 16 information signals, clock signal, adress\control signals) Is it conceivable these signs I mimic one time and I see EMI estimations load up level? I utilize Allegro PCB SI. I know Allegro PCB SI figure single net EMI reenactment?

pcb design for manufacturing checklist
robertferanec , 08-14-2020, 05:34 AM
I do not really have experience with EMI simulation ... at lest not yet. The best may be to speak to someone in Cadence to help you with this - or maybe someone from this forum can help?
Use our interactive Discord forum to reply or ask new questions.
Discord invite
Discord forum link (after invitation)

Didn't find what you were looking for?