| FORUM

FEDEVEL
Platform forum

DP83848 footprint problem

Baby_1 , 11-30-2019, 11:36 PM
Hello,
I have drawn the footprint of DP83848CVV but after assembling the IC by hand it was to difficult to match my IC on the PCB and I had to change the distance of the pin by another tool. would it be possible to check the DP83848CVV that I have drawn?

I will be grateful if you could take some time to check my footprint.


PcbLib2.PcbLib:


robertferanec , 12-02-2019, 04:39 AM
If you are not sure, print the footprint in Scale 1:1 and put real component on the top of it. That is what I do. Hope this helps.
Baby_1 , 12-04-2019, 12:31 AM
I really appreciate your help.
I did it but it doesn't work properly because I can't check these small pins by eyes. I need to know for these kinds of ICs that min/max pin size is mentioned how we can define the pins size.
robertferanec , 12-04-2019, 12:18 PM
This is what I use, very useful for footprint checking: https://sk.farnell.com/coil/5408/mag...s-x7/dp/201881

PS: I am working on a video which would give more details about what is important about creating footprints and how you get the numbers for pad size.
Use our interactive Discord forum to reply or ask new questions.
Discord invite
Discord forum link (after invitation)

Didn't find what you were looking for?