strange stetch by assemby view

[Siwei Xia]

Hello,

I have some very strange sketch on the assembly view. (see attachment)

this phenomena occurrs especially by some diodes. I checked the footprint setup (the sketches by all kinds of layers) again and again, but I didnt see anything wrong.

if any one can help?

best regards
Siwei

[robertferanec]

I have seen those. I believe it was connected with 3D model. When I used a different 3D model, the problem was fixed.

[Siwei Xia]

Thanks for your feedback.

Yes, this phenomena occurs only "sometimes" and the 3D-model were generated by Altium Footprint Wizard. I just input some parameter from the datasheet.

What interesting is, the strange "line" does have a meaning - they always occurr on kathode side -_-

Any way, this is not a fatal error, the live keeps going on

[robertferanec]

Maybe try to open the STEP file in Fusion 360 and have a look if there is something visibly wrong. Maybe it can be easily corrected:

https://www.autodesk.com/products/fusion-360/personal