| FORUM

FEDEVEL
Platform forum

strange stetch by assemby view

Siwei Xia , 06-30-2020, 03:39 AM
Hello,

I have some very strange sketch on the assembly view. (see attachment)

this phenomena occurrs especially by some diodes. I checked the footprint setup (the sketches by all kinds of layers) again and again, but I didnt see anything wrong.

if any one can help?

best regards
Siwei








robertferanec , 07-01-2020, 07:25 AM
I have seen those. I believe it was connected with 3D model. When I used a different 3D model, the problem was fixed.
Siwei Xia , 07-08-2020, 06:39 AM
Thanks for your feedback.

Yes, this phenomena occurs only "sometimes" and the 3D-model were generated by Altium Footprint Wizard. I just input some parameter from the datasheet.

What interesting is, the strange "line" does have a meaning - they always occurr on kathode side -_-

Any way, this is not a fatal error, the live keeps going on
robertferanec , 07-09-2020, 02:25 AM
Maybe try to open the STEP file in Fusion 360 and have a look if there is something visibly wrong. Maybe it can be easily corrected:
Compare features and functionality between Fusion 360 for personal use and Fusion 360 and learn which CAD, CAM, CAE and PCB software is the right solution for you.
Use our interactive Discord forum to reply or ask new questions.
Discord invite
Discord forum link (after invitation)

Didn't find what you were looking for?