-
Dear nhatelectronic2020 the pictures are missing. I am not sure what exactly you mean, but sometimes I make pads a little bit bigger to be able to solder / desolder some components by hand. Usually I print all the footprints, compare them with a real component and when I think it has to be adjusted, I just do it. This may help: How to Check PCB Footprint vs Real Component https://youtu.be/HG-5Wr7zSX8 -
Dimension Library
Dear Mr. Robert Fedevel
I am a student in the Advanced PCB Layout Course. Very good course, it helps me better in designing PCB.
I have some questions about the Dimension Library asking for your help.
VD IHLP2020CZER1R5M11
Recommend of Manufactury Vishay Dale
Figure 1
And by Robert Fedevel
Figure 2
How did I know about the dimensions added when he implemented this Creat Libray.
To implement for my library
Best regards,
- You have to register before you can post. To keep this forum out of spammers, every registration is manually approved.
- If you know answers on any questions on this forum, please feel free to answer them. (PS: I try to answer at least once a week or when possible, - Robert)
Leave a comment: