Announcement

Collapse
No announcement yet.

Moving components during the pcb layout

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • robertferanec
    replied
    Just in case, here is screenshot from the filter:
    Click image for larger version

Name:	filter settings.PNG
Views:	47
Size:	103.6 KB
ID:	16099

    PS: Normally it should not be possible just to move pads, be sure, when you select your components, primitives are locked (they should be locked by default):
    Click image for larger version

Name:	primitives locked.PNG
Views:	24
Size:	87.7 KB
ID:	16100

    Leave a comment:


  • WhoKnewKnows
    replied
    It takes a little diligence to make sure you have selected the entire component to move in the design instead of a part of the component. Something that can help with this is to limit what can be selected with the selection filter. With the PCB document active, select nothing (shift + c) and look to the properties panel. There are buttons you can turn on and off to enable selecting various types of objects. If you're planning layout, you might turn everything off except for components. If you're routing, you might turn everything off except for tracks, and so on.

    For most mistakes, undo (Ctrl + z) works and you can sequentially undo back many moves. If you mistakenly undo too far, redo also works to get back to where you were (Ctrl + y)

    Save your work frequently (Ctrl + s) it inspires logging and backup efforts from Altium.

    Leave a comment:


  • Lucky-Luka
    started a topic Moving components during the pcb layout

    Moving components during the pcb layout

    Hi all
    During the pcb layout I've noticed that I need to move some components in order to have enough space for traces.
    What is the best way to do it?
    As a beginner I've noticed I have done a mistake while trying to move a component (I avoided to save fortunately): I moved only the pads leaving the silkscreen behind.
    What filters do I have to enable to modify the components' position smartly? Thanks
    Attached Files
Working...
X