| FORUM

FEDEVEL
Platform forum

connection line

companywe , 06-20-2022, 12:41 AM
Hello all,
Please help me, how can I have connections line between 2 components (J2 and MCU) when I drag the J2 like this image?
Everything is normal with other components except J2 and J1,
thanks in advance!
chitransh92 , 06-20-2022, 02:43 AM
Hi @companywe,
In your design go to View Menu -> Connections -> Show All.
companywe , 06-20-2022, 02:45 AM
Originally posted by chitransh92
Hi @companywe,
In your design go to View Menu -> Connections -> Show All.
yes, i did, but still no connection between J2, J1 and MCU.
chitransh92 , 06-20-2022, 02:47 AM
You can check if the netlist is imported correctly or not..
Do you see the Net names if you zoom in on the component Pins??
companywe , 06-20-2022, 02:51 AM
Originally posted by chitransh92
You can check if the netlist is imported correctly or not..
Do you see the Net names if you zoom in on the component Pins??
No problem with netlist. I can see the name of the J1 pad, the connection line is only lost when I move J1 and J2. I don't know why
WhoKnewKnows , 06-20-2022, 07:42 AM
I gather from your last post, the connection lines exist, but disappear when the part is moved, then reappear when you release the part?

OR

Do the connection lines never appear for these parts?

robertferanec , 06-25-2022, 01:05 AM
Is this what you need?
hello everyone, i'm learning the Advanced PCB Layout course,in Lesson 1 when i placement the connector J1 or J2 , the nets didn't show,but other components are ok.what's going on?my altium designer version is 20.0.9with no nets.pngwith nets.png
Use our interactive Discord forum to reply or ask new questions.
Discord invite
Discord forum link (after invitation)

Didn't find what you were looking for?