Announcement

Collapse
No announcement yet.

About vias that do not connect with internal layer

Collapse
This topic has been answered.
X
X
 
  • Time
  • Show
Clear All
new posts

  • About vias that do not connect with internal layer

    Hi everyone,

    I have a few vias located on a vertical line, connected to a polygon pour on the top layer.
    The net name for those vias is 3V0_S0.

    I have an internal layer embedding a large polygon pour with same net name.

    The vias do not connect on this internal layer.
    Some of them trigger an antennae violation, the other ones don't.

    Any idea maybe ?

    Thanks a lot.


  • Answer selected by mulfycrowh at 08-17-2022, 07:14 AM.

    Guys, I found the issue.
    It was written in the screenshot: I wrote 3V0_S0 instead 3V3_S0 on power supplies.

    It is worth one dislike !

    Comment


    • #2
      Guys, I found the issue.
      It was written in the screenshot: I wrote 3V0_S0 instead 3V3_S0 on power supplies.

      It is worth one dislike !

      Comment

      Working...
      X
      😀
      🥰
      🤢
      😎
      😡
      👍
      👎