Announcement

Collapse
No announcement yet.

Component placement with Probe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Component placement with Probe

    What shoud I set in Preferences to able to use the probe in schema, which will mask the PCB and then select a component on schematic without loosing the previous mask in PCB?

  • #2
    joaorbeck
    Junior Member
    joaorbeck I exactly know what you mean. This is a bug (or a new "future" ?) from Altium 14.3 and up.

    Option 1: Temporarily you can select components first and highlight the net (CTRL + Left Click) after that. It's not as good as mask, but it helps.

    Option 2: Possibly, you can use "Select" mode. Go to Schematic -> Navigator panel, move cursor on the Navigator panel -> Press right click -> and check: Select Objects.

    I mentioned this problem to Altium, but I am not sure if or when they are going to fix it. I hope this helps.

    Comment


    • #3
      I have created a video about this. Have a look at: Altium – Component Placement & Probing (The New & Old Way)

      Comment

      Working...
      X