Announcement

Collapse
No announcement yet.

Design Rule Check problem!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Design Rule Check problem!

    Hi Guys,

    In a design with AD17, when I ask to check design rules, Altium start to consume all CPU power and lock with a message on status bar, as shown in figure.
    Do you have any idea what is issue?

    I have checked another design, it works with no problem!

    Click image for larger version

Name:	error.jpg
Views:	7
Size:	13.5 KB
ID:	4972

  • #2
    So, maybe it is a problem related to the project? I would try to delete all the polygons and if it then works, I would maybe try to identify which of the polygons is wrong and redraw it. Possibly I would just delete part of the design and try to locate what is causing the problem.

    Comment


    • #3
      Hi,

      I did remove the polygon, but issue was there. Then I unroute the board, suddenly it is gone.

      BR,

      Comment


      • #4
        Perfect. Now just try to locate the wrong connection It should be fixable.

        Comment

        Working...
        X