Announcement

Collapse
No announcement yet.

metal shield over the PCB

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • metal shield over the PCB

    Dear Robert

    I have seen many boards which was shielded by a metal over the whole PCB or over a especial place of the board. How we can implement this by altium? which company do this job for us? How much it cost for us?
    Regards,

  • #2
    I do not know any specific companies, but you may probably google them. I have seen couple of them on PCB West last year. However, I am not sure how much it cost.

    To create support for shielding should not be a problem. Draw a GND track stitched with VIAs and add some holes to solder down the shield. Do not forget to unmask the track. However, there may be also some other techniques - I would probably check out several other boards to see how they do it.

    Comment


    • #3
      Originally posted by fatemehjml View Post
      Dear Robert

      I have seen many boards which was shielded by a metal over the whole PCB or over a especial place of the board. How we can implement this by altium? which company do this job for us? How much it cost for us?
      Regards,

      There is two shields type ,shielding frame and shielding cover , The frame is welding on the PCB board ,The cover is easy to move if need maintain.
      Normal there are two material ,Nickel silver and tinplate , It's depend on your needs , You can try www.jingyiprecision.com to know more about it .
      Attached Files

      Comment


      • #4
        This company has a number of interesting products that might stimulate your thinking. I have used the SMT clips that we then placed a custom shield onto which was covering and switching power supply.

        https://www.harwin.com/product-highl...-shield-clips/

        Comment

        Working...
        X