The distance of copper in Flex slices

[alferdvidal]

Hi guys
I made a LED strip and sent it to the factory for production, but it said that the Copper distance is 0.05 and cannot produce it, I should leave a distance of 0.15. My question is, what should I do? Can anyone help me?
To further understand the question, the attached document may help
Thank you in advance

[robertferanec]

You may need to correct clearance rule. Go to Design -> Rules -> Design Rules -> Electrical -> Clearance and check what is your smallest clearance. It should not be less than 0.15mm

[alferdvidal]

Hi Robert
Thanks a lot
Alrerd