Announcement

Collapse
No announcement yet.

Warning message in exporting gerber

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Warning message in exporting gerber

    hello,everyone
    when exporting gerber files,the following warning occured:

    ================================================== ==============
    PROCESSING FILM < 03-TOP_SOLDER >
    TO FILE < D:/workspace/Cadence/1.My Design Projects/1.IS6236A/V1I1/IS6236A_V1I1_03-TOP_SOLDER.art > ...
    ================================================== ==============

    FILM PARAMETERS :
    ---------------------------------------------------------
    Undefined line width 0.0000
    Mirror code NONE
    Rotate angle NONE
    Offset x: 0.0000
    Offset y: 0.0000
    Plot negative NO
    Suppress unconnected internal pads NO
    Draw holes only NO

    WARNING: Arc segment with end points of
    (13.64, 4.36) and (13.92 4.36) converted to a line.
    Its center location (13.61 104.72) is too large for
    specified integer accuracy of 2 places.

    how to fix it?

  • #2
    Did you find the Arc? Could you take screenshot of the arc? Maybe it is very small?

    Comment


    • #3
      Originally posted by robertferanec View Post
      Did you find the Arc? Could you take screenshot of the arc? Maybe it is very small?
      thanks RF,the location is the logo.I think i can ignore.

      Comment


      • #4
        Interesting, that it was not fixed by the db doctor. If everything looks ok, then you can ignore it (or you can try to correct / redraw it in the logo footprint)

        Comment

        Working...
        X