| FORUM

FEDEVEL
Platform forum

Warning message in exporting gerber

MrSun , 05-14-2019, 05:33 AM
hello,everyone
when exporting gerber files,the following warning occured:

================================================== ==============
PROCESSING FILM < 03-TOP_SOLDER >
TO FILE < D:/workspace/Cadence/1.My Design Projects/1.IS6236A/V1I1/IS6236A_V1I1_03-TOP_SOLDER.art > ...
================================================== ==============

FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 0.0000
Mirror code NONE
Rotate angle NONE
Offset x: 0.0000
Offset y: 0.0000
Plot negative NO
Suppress unconnected internal pads NO
Draw holes only NO

WARNING: Arc segment with end points of
(13.64, 4.36) and (13.92 4.36) converted to a line.
Its center location (13.61 104.72) is too large for
specified integer accuracy of 2 places.

how to fix it?
robertferanec , 05-15-2019, 02:29 AM
Did you find the Arc? Could you take screenshot of the arc? Maybe it is very small?
MrSun , 05-15-2019, 08:10 AM
Originally posted by robertferanec
Did you find the Arc? Could you take screenshot of the arc? Maybe it is very small?
thanks RF,the location is the logo.I think i can ignore.
robertferanec , 05-16-2019, 02:20 AM
Interesting, that it was not fixed by the db doctor. If everything looks ok, then you can ignore it (or you can try to correct / redraw it in the logo footprint)
Use our interactive Discord forum to reply or ask new questions.
Discord invite
Discord forum link (after invitation)

Didn't find what you were looking for?