I am trying create in the mechanical symbol and follow all your instructions but I have different logo import. the fa_logo_6x6mm came out bigger. so I went to copy the one you got in the Orcad course. after I finished Lesson 10, I then check my board and found that there are 3 Unassigned shapes. How do I resolved these issues.
Announcement
Collapse
No announcement yet.
logo issues
Collapse
X
-
Hi Robert, I am working on Lesson 12. I tried to add variant name but the 09-MFG ASM-Bot-5V variant did not show up. The other 3 variant for the top 5V, the 6-24V top and bottom showed up. I followed all you instruction. Also when I output the artwork there is an error message showed up says Database has errors; artwork generation canceled. Please run dbdoctor. I run the dbdoctor and output the Gerber again and the same error message shows up again. Can you please tell me how to correct these issues. Thank you.
Comment
-
I am not sure why it doesn't work on your computer. Maybe try first my finished project, see if everything is working ok and then try yours. What layer gives you the dbdoctor error?
- I tried to generate the artwork - works ok on my computer. I do not get any messages about running dbdoctor.
- I can see the 5V B variant ok:
Comment
-
I went back to (Lesson 11 - 29:15) and follow how you did it but the 5V Variant bottom assembly still came out wrong. do I need to delete the 5V Variant bottom variant and re enter it again. I emailed you my schematic and PCB files. I also went to your assembly drawing and the 5V Variant is correct. I hope you have time to check my board. Thanks
Comment
Comment