Announcement

Collapse
No announcement yet.

Export IPC2581 error on silkscreen layer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Export IPC2581 error on silkscreen layer

    I have a mechanical symbol on the silkscreen layer of my PCB as the company logo, but I am getting this error :

    Collecting package defintions ...
    WARNING: No PLACE_BOUND outline found for the package "LOGO_SYMBOL", IGNORED.
    Collecting component descriptions ...
    WARNING: No PLACE_BOUND outline found for the symbol located at (82.000, -33.000), (SymbolName="LOGO_SYMBOL"), IGNORED.

    I followed the instructions on lesson 10 of the Learn Orcad and Allegro essentials and still got the same error with that method.

    I tried putting a place boundary around the logo and it got rid of the error, but then created a 3d shape on the board that I do not want.
    Please let me know what I can do to get rid of this error while not creating a 3d object.


  • #2
    I am not sure why it is doing ... but you may be able to specify 0mm height and 3D shape will not be shown?

    Comment

    Working...
    X