Announcement

Collapse
No announcement yet.

Variant

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • robertferanec
    replied
    So,@robertferanec ,How can I fix it?
    Nguyenvanhieu, hmm, I played with your project for some time, but I do not know what the problem is. Maybe, first, test if the problem is in the library or project. For example, try to use the library with a new project and see if behavior is same. Possibly, try to create new crystals in library (create them from scratch) and see if you use them in your project, if the behavior is same.

    Please, when you come up with a solution, let me know. I really would like to know what the problem is - it's really weird.

    Leave a comment:


  • Nguyenvanhieu
    replied
    Sorry @maicromaster,please send me your email.I will share my drive

    Leave a comment:


  • Nguyenvanhieu
    replied
    So,@robertferanec ,How can I fix it?

    Leave a comment:


  • robertferanec
    replied
    But there is still something weird in schematic / project / Variant / Altium. The crystals keep moving between variants (re-position themselves). I do not really know why (even if I replace the crystal for itself in the variant, it still will move .... watch how I switch from variant 5V to 5V/3V3)


    Click image for larger version

Name:	variant moving problem 03.png
Views:	48
Size:	129.3 KB
ID:	4381


    Click image for larger version

Name:	variant moving problem 04.png
Views:	48
Size:	129.2 KB
ID:	4380

    Leave a comment:


  • robertferanec
    replied
    Nguyenvanhieu your 8MHz crystal definition is wrong in the library, it has two footprints:


    Click image for larger version

Name:	wrong footprint definition.png
Views:	71
Size:	98.5 KB
ID:	4375

    Leave a comment:


  • robertferanec
    commented on 's reply
    Yes me too. Nguyenvanhieu sent me the file by mail.

  • mairomaster
    replied
    I was curious to check the project as well, but your link doesn't seem to work. It takes me to my personal google drive.

    Leave a comment:


  • Nguyenvanhieu
    replied
    Hi robertferanec For easier,I uploaded my project to googledrive.You can follow this link https://drive.google.com/drive/my-drive to see what really problem.
    And after fixed it, please,take 5 minutes to see my pcb,give me some note for something need to be improved. Its very important to me at this time.5 mins=big encouragement.
    Thankyou.

    Leave a comment:


  • robertferanec
    replied
    Oki, please let me know then.

    Leave a comment:


  • Nguyenvanhieu
    replied
    I use altium 15.

    Leave a comment:


  • Nguyenvanhieu
    replied
    Oh,Really? I think its not big issue although doesn't look like.I will use variant in other project and see if this problem happens again,I will tell you know

    Leave a comment:


  • robertferanec
    replied
    Maybe just try to delete the component and place it again, maybe it will help you? I have done nothing, it just worked, but you didn't send me your project (only schematic and library), so I had to create the project by myself and can be different from yours. Also, some Altium versions had bugs in Variants ... what Altium version do you use? I used AD16.

    Leave a comment:


  • robertferanec
    replied
    Nguyenvanhieu, it worked for me ok:


    Click image for larger version

Name:	crystal alternative.png
Views:	57
Size:	174.4 KB
ID:	4335

    Leave a comment:


  • Nguyenvanhieu
    replied

    Leave a comment:


  • Nguyenvanhieu
    replied
    Here is my project

    Leave a comment:

Working...
X
😀
🥰
🤢
😎
😡
👍
👎