Componment clearence
Modjo , 11-16-2018, 01:36 PM
Hi, in video 7 i have a problem with the component clearence constraint . I have configured rules like in the video (i think) but i have 2 errors with J2 and MH2 / SCKT and U1, see picture Under :
robertferanec , 11-20-2018, 02:10 AM
Can you attach screenshot from "PCB Rules and Violations" Panel? I would like to see what exactly it says.
Modjo , 11-26-2018, 06:14 AM
Sorry for the delay in my answer, under the picrures asked :
robertferanec , 11-26-2018, 09:09 AM
The violation says, the components are 0.03mm from each other and should be at least 0.2mm. So, the exception doesn't work for them (is not correctly set)?
Modjo , 11-28-2018, 02:11 AM
Sorry for the delay in my answer but last two days the web site didn't working good for me. See under the picture of the rule that i created that didn't work ...
robertferanec , 11-29-2018, 10:46 AM
Hmm, it looks like the rule is set correctly. I am not sure what is happening. Try double click on the error inside of the "PCB Rules and Violations" - that should show you exactly where the error is. Maybe it will help?
Modjo , 11-29-2018, 01:06 PM
It like the rule isn't take in consideration ...
robertferanec , 11-29-2018, 02:01 PM
Please, send me the project (delete history directory). I will have a look.
Modjo , 11-29-2018, 02:20 PM
Ok, i just send you it by email
robertferanec , 12-01-2018, 03:05 AM
You need to increase priority of the rule, then it will work ok:
Modjo , 12-01-2018, 05:34 AM
Thanks a lot it work fine now ! Not evident to change priority in the rules ...
Use our interactive Discord forum to reply or ask new questions.