Announcement

Collapse
No announcement yet.

VTT Plane decoupling for the Address lines - DDR3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • robertferanec
    replied
    I have not seen any documents directly saying it like that, but there are some explaing some of the stuff. I think in this Server DDR4 Memory Layout & CPU Power video I used a document speaking about this topic a little bit: https://www.youtube.com/watch?v=rdlEm2xjCsc

    Leave a comment:


  • chitransh92
    replied
    robertferanec , Thank you for the explanation..
    I makes some sense to me now...

    Are there any more document online where I can increase my understanding on this topic.??
    For the DDR3 BGA ICs...

    Leave a comment:


  • robertferanec
    replied
    Depends on layout and what you use as a reference plane for your ADDR/CMD/CTL signals. If the reference plane is 1.5V, you may want to use capacitors between 0.75V and 1.5V. We use both (GND and 1.5V) as reference planes, so we put there both types of capacitors.

    Leave a comment:


  • chitransh92
    replied
    robertferanec .. I understand..
    The question why is it done in this fashion???

    Are we using the 1.5V rail to provide sufficient transient charge to 0.75 DDR_VTT net??
    Or these is some other reason for doing this...

    if you can kindly explain..

    Leave a comment:


  • robertferanec
    replied
    They are connected on both sides:
    - some are connected between 0.75V and 1.5V
    - other are connected between 0.75V and GND

    Leave a comment:


  • Paul van Avesaath
    replied
    is there a voltage divider somewhere? this si a very small piece of the schematic..

    Leave a comment:


  • chitransh92
    started a topic VTT Plane decoupling for the Address lines - DDR3

    VTT Plane decoupling for the Address lines - DDR3

    Hello robertferanec ,
    In the open rex design the Caps for the +1V75_DDR_VTT nets are connected in a way that I am unable to understand.

    Why the caps are connected with +1V5_DDR net on one side and why not all the caps are connected in Parallel.

    Thank you.
    Attached Files
Working...
X