-
Unless, people from NXP will tell you that you can do it or unless you test it on a board (e.g. take a reference board, disconnect the powers, desolder the pins and heavily test the board), I would not do that.Leave a comment:
-
Power supply of imx6
I'm designing my own imx board without ethernet, mipi, csi, RGMI and sd1 and 3. Can i remove the decoupling capacitors connected to NVCC_ENET, NVCC_CSI, NVCC_MIPI, NVCC_SD1 and NVCC_SD3 and just leave the pins unconnected or is it compulsory i place the capacitors there even if i'm not using those interfaces.
- You have to register before you can post. To keep this forum out of spammers, every registration is manually approved.
- If you know answers on any questions on this forum, please feel free to answer them. (PS: I try to answer at least once a week or when possible, - Robert)
Leave a comment: