Tweet
Hi everyone!
I tried to check why PCIe data differential signals have 90Ohm differential impedance and clk 100Ohm. In IMX6DQ6SDLHDG.pdf there is a guidline that says differential impedance should be 85Ohm +/- 10% for differential pairs (page 61/128). I suppose that is why RX and TX have 90Ohm impedance (it falls within 85Ohm+/-10%). I see no mention of clk diff pair have 100Ohm impedance in either IMX6DQ6SDLHDG.pdf or Freescale design guide (http://www.freescale.com/files/train...IGN_PCI_SMGIII
.pdf).
I saw in one of the Robert's responses reference to https://www.renesas.com/eu/en/docume...ign-guidelines
it recommends 100Ohm for Clk, Rx and Tx.
Thanks,
Miloš
I tried to check why PCIe data differential signals have 90Ohm differential impedance and clk 100Ohm. In IMX6DQ6SDLHDG.pdf there is a guidline that says differential impedance should be 85Ohm +/- 10% for differential pairs (page 61/128). I suppose that is why RX and TX have 90Ohm impedance (it falls within 85Ohm+/-10%). I see no mention of clk diff pair have 100Ohm impedance in either IMX6DQ6SDLHDG.pdf or Freescale design guide (http://www.freescale.com/files/train...IGN_PCI_SMGIII
.pdf).
I saw in one of the Robert's responses reference to https://www.renesas.com/eu/en/docume...ign-guidelines
it recommends 100Ohm for Clk, Rx and Tx.
Thanks,
Miloš
Comment