| FORUM

FEDEVEL
Platform forum

Forum / iMX6 Rex, TinyRex, OpenRex / USB OTG & How to change current OS of imx6

USB OTG & How to change current OS of imx6

Joseph George , 02-28-2017, 08:24 PM
Please Share the details/steps to activate USB OTG. (USB OTG is detected but we can’t program).
Also send me the details to change the built in LINUX KERNAL to any other OS(VxWorks). Is it possible through MFG Tool from NXP.
robertferanec , 03-02-2017, 09:42 AM
@Joseph George, I am not really sure what you mean.

- Do you mean using MFG Tools together with USB? You can find some info here:
How to setup MFGTOOL - iMX6 Rex Projects
http://www.imx6rex.com/open-rex/software/how-to-setup-mfgtool/
MFGTOOL is used to upload uBoot into OpenRex through a micro USB cable. It's used in cases when the board is new (a board from production with no uBoot yet), in

How to uBoot - Compile, Flash, Update, Boot - iMX6 Rex Projects
http://www.imx6rex.com/open-rex/software/how-to-uboot-compile-flash-update-boot/
Content Get and compile the latest uBoot Run uBoot on an empty board Flash uBoot for the very first time into a fresh board Programming eFuses on very fresh


- To build a different OS, you may need to go to the other OS website and follow instructions to build it for iMX6 CPU
Use our interactive Discord forum to reply or ask new questions.
Discord invite
Discord forum link (after invitation)

Didn't find what you were looking for?

CONTACT US