-
I remember this - we were thinking about it too. Then we decided to test it and we do connect LEDs directly to the CPU pins through series resistor. Have a look at the page 25: http://www.imx6rex.com/wp-content/up...Production.pdf -
Connecting LED directly to OpenRex GPIO
Hi,
Is it safe to connect LED directly to GPIO pin of OpenRex via a serial current limiting resistor ?
Can the GPIOs drive the LED ? There is not much information about the gpio drive capability in the i.mx6 referene manual .
Thanks
Shafy
- You have to register before you can post. To keep this forum out of spammers, every registration is manually approved.
- If you know answers on any questions on this forum, please feel free to answer them. (PS: I try to answer at least once a week or when possible, - Robert)
Leave a comment: