| FORUM

FEDEVEL
Platform forum

Question about imx6 Rex development baseboard

Vauteck , 02-13-2018, 02:13 AM
I have 2 questions concerning PCIe support for the imx6 Rex development base board.

- Why is PCIe marked as Debugging (optional) ? Do I have to specifically need to ask for a base board with PCIe support or do all the base board support PCIe ?

- Looking at the dts (imx6dl-rex-basic.dts, imx6qdl-rex.dtsi) in the mainline and NXP linux kernels (4.1.x+), I don't see any line for PCIe configuration. Does that mean I'll have to write PCIe dts configuration myself ?

Thanks

Regards,

Quentin
robertferanec , 02-13-2018, 09:18 AM
- If you mean the slot, you will need to swap 0R resistors (by default the PCIE is connected to PCIE mini card slot). That is why it is called Optional.

- You can find a lot of information about software support on VOIPAC wiki website (not all updates are included in mainline kernel): http://wiki.voipac.com/xwiki/bin/view/imx6+rex/

This is from older kernel, but may be also useful:
Content DDR3 Memory Booting from a RAM filesystem Ethernet PCI Express USB SD card Prepairing SD card for a filesystem Listing SD card files in
Use our interactive Discord forum to reply or ask new questions.
Discord invite
Discord forum link (after invitation)

Didn't find what you were looking for?