| FORUM

FEDEVEL
Platform forum

Fbga

karimoviç , 06-22-2020, 01:28 AM
Hello , i need some information for the BGA design in altium !
EP4CE30F23C8N i will use this ship for my card , i need some advices , schematic ...
@robertferanec
please it's so urgent
ps ; it's my first design with FPGA
chitransh92 , 06-23-2020, 11:22 AM
What about it you need??
karimoviç , 06-26-2020, 02:12 AM
hello , can some one explain to me the regulators circuit please (page 1 )
https://www.hdl.co.jp/en/spc/ACM/acm...05R1-SCH-C.pdf
robertferanec , 06-29-2020, 01:30 AM
@karimoviç start with a reference board. If you do not fully understand the reference board, only do as a few changes as you have to. I would recommend do not change regulators if you are not sure about them.
karimoviç , 06-29-2020, 03:14 AM
Thanks for response @robertferanec , yes i'm starting do this , but now i don't know how to fix the VCCIO for each bank of my FPGA , They can work with 1.2 v , 2.5v ,1.8v , 3v and 3.3V and can't know how to fix the right voltage supply value for each Bank :/ !
robertferanec , 06-29-2020, 07:33 AM
It depends what is connected to the specific bank - if a chip what is using 3v3 interface, you need to power that specific bank with 3v3, if you connect there a chip with 1.8V you will need to power the bank with 1.8V, etc
karimoviç , 06-30-2020, 02:07 AM
thank you so much @robertferanec
Use our interactive Discord forum to reply or ask new questions.
Discord invite
Discord forum link (after invitation)

Didn't find what you were looking for?