Announcement

Collapse
No announcement yet.

Fbga

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • karimoviç
    replied
    thank you so much robertferanec

    Leave a comment:


  • robertferanec
    replied
    It depends what is connected to the specific bank - if a chip what is using 3v3 interface, you need to power that specific bank with 3v3, if you connect there a chip with 1.8V you will need to power the bank with 1.8V, etc

    Leave a comment:


  • karimoviç
    replied
    Thanks for response robertferanec , yes i'm starting do this , but now i don't know how to fix the VCCIO for each bank of my FPGA , They can work with 1.2 v , 2.5v ,1.8v , 3v and 3.3V and can't know how to fix the right voltage supply value for each Bank :/ !

    Leave a comment:


  • robertferanec
    replied
    karimoviç start with a reference board. If you do not fully understand the reference board, only do as a few changes as you have to. I would recommend do not change regulators if you are not sure about them.

    Leave a comment:


  • karimoviç
    replied
    hello , can some one explain to me the regulators circuit please (page 1 )
    https://www.hdl.co.jp/en/spc/ACM/acm...05R1-SCH-C.pdf

    Leave a comment:


  • chitransh92
    replied
    What about it you need??

    Leave a comment:


  • karimoviç
    started a topic Fbga

    Fbga

    Hello , i need some information for the BGA design in altium !
    EP4CE30F23C8N i will use this ship for my card , i need some advices , schematic ...
    robertferanec
    please it's so urgent
    ps ; it's my first design with FPGA
Working...
X