Distance between adjacent high speed PCB tracks
gyuunyuu1989 , 04-15-2023, 08:27 PM
How does one determine the spacing between high speed PCB track and other tracks to minimse the cross talk and coupling of electric and magnetic fields? I believe it depends on the distance from ground plane, width of track and the thickness of copper but do not know an exact solution.
robertferanec , 04-18-2023, 08:32 AM
Some time ago I created this video, it may help:
TIP #025: Try to use as big gap / clearance between signals as possible
TIP #025: Try to use as big gap / clearance between signals as possible
qdrives , 04-16-2023, 01:43 PM
Have you looked at the PCB toolkit - crosstalk tab?
Paul van Avesaath , 04-18-2023, 07:45 AM
in general use at least 4x line width.. to the adjacend trace.. so if your trace is 10 mill, the distance between this trace and the next is 40 mill.
robertferanec , 04-18-2023, 08:32 AM
Some time ago I created this video, it may help:
TIP #025: Try to use as big gap / clearance between signals as possible
TIP #025: Try to use as big gap / clearance between signals as possible
gyuunyuu1989 , 04-21-2023, 11:41 AM
Thanks Robert.
Looking forward to a video that can comprehensively deal with the topic of via used in high speed PCBs.
Looking forward to a video that can comprehensively deal with the topic of via used in high speed PCBs.
Use our interactive Discord forum to reply or ask new questions.