Announcement

Collapse
No announcement yet.

How to design footprint for RN2483 module.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mohsin_qau
    replied
    @Page 9.... Irs clearly mention the PAD Size. See the attachment.

    Leave a comment:


  • Naveen G Bhat
    commented on 's reply
    Thank you.

  • Muhmmad Ahsan
    replied
    if you have still confusion used this below link
    https://www.snapeda.com/parts/RN2483...N2483%20module
    To download Library file according to your Tool

    Leave a comment:


  • Naveen G Bhat
    commented on 's reply
    i got it, i don't have module with me.
    thank you so much sir.

  • Muhmmad Ahsan
    replied
    It is better ,if you have module itself, Make the foot print according to above mention dimension and print out at actual size on paper and place the module on it so you can get better idea

    Leave a comment:


  • Muhmmad Ahsan
    replied
    They are mention at right hand side with the Heading of Pad Details which is 1.016*1.524

    Leave a comment:


  • Naveen G Bhat
    commented on 's reply
    i referred that, in that module dimension and pad pitch are given, but they did not mentioned the pad dimension like length and width of the each pad.

  • Muhmmad Ahsan
    replied
    http://ww1.microchip.com/downloads/e.../50002346C.pdf
    USE this above link you will find your requirement
    Thanks

    Leave a comment:


  • Naveen G Bhat
    started a topic How to design footprint for RN2483 module.

    How to design footprint for RN2483 module.

    I am using microchips RN2483 Lora module for my one of project,I am attaching the datasheet of RN2483 module, in that data sheet they did not mentioned the pad size, so that i confused how to design the footprint,please help me in this.
    Attached Files
Working...
X