Announcement

Collapse
No announcement yet.

Additional lines after PCB production.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Baby_1
    replied
    Originally posted by qdrives View Post
    1) How does the board look in 3D?
    2) On the bottom right of the last picture it has the "Solder mask expansion". It is manual, but what is the width?
    3) have you drawn on the soldermask layer?
    Thank you very much, your precious comments helped me.

    Leave a comment:


  • chaitnya
    replied
    I would also recommend Check in gerber solder mask layer first which you have sent to PCB manufacturer if it is ok then revert back to PCB manufacturer to know how it's happened.

    Leave a comment:


  • robertferanec
    replied
    Very interesting.

    I would also recommend to check the gerber files directly e.g. you can check gerber files in Altium or for example in ViewMate (I use the free version: https://www.pentalogix.com/t/software-products/viewmate )

    Leave a comment:


  • qdrives
    replied
    1) How does the board look in 3D?
    2) On the bottom right of the last picture it has the "Solder mask expansion". It is manual, but what is the width?
    3) have you drawn on the soldermask layer?

    Leave a comment:


  • Baby_1
    started a topic Additional lines after PCB production.

    Additional lines after PCB production.

    Hello,
    I sent my PCB file to two different companies and they produced my PCB boards. But after getting them back, I see some additional lines which are not covered by the solder mask. I checked my PCB file and I didn't see anything on other masks. what is my mistake?

    Click image for larger version

Name:	1596176404953.JPEG
Views:	80
Size:	362.8 KB
ID:	15079


    Click image for larger version

Name:	95.PNG
Views:	68
Size:	121.8 KB
ID:	15078

    Click image for larger version

Name:	94.PNG
Views:	134
Size:	85.1 KB
ID:	15077
Working...
X