Announcement

Collapse
No announcement yet.

Adapting FPGA LVDS to MIPI - CSI camera interface

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Adapting FPGA LVDS to MIPI - CSI camera interface

    -Hi all,

    -I´m planning to buy a new HI RES camera module for my Arrow Sockit board dev board because the Raspberry pi compatible modules are cheap and my actual camera module(parallel) it´s getting old.

    -I read that MIPI CSI is not compatible with LVDS (MiPI uses a physical layer called D-Phy)

    -There are one LVDS to D phy ic adapters but there are hard to find.

    So i have 2 solutions:

    - Design an adapter interface (Xilinx haves some guidelines but they advertise that at high speeds can fail)

    - Pass the MIPI CSI camera trough this ic TC358748XBG that is a mipi decoder

    Any ideas?

  • #2
    I have not done this, so I can not really help

    Comment

    Working...
    X