| FORUM

FEDEVEL
Platform forum

Share your PCB stackups

robertferanec , 07-29-2020, 03:43 AM
I am creating this post as a space for your stackups which you are happy to share with others. Feel free to upload here the stackups what you have used in your projects. It can really help to other people. Thank you for sharing. - Robert
robertferanec , 07-29-2020, 03:46 AM
giannisasp , 07-31-2020, 03:31 AM
Hi Robert,
Here is a small contribution from me as well.
Its a custom 6L stackup from an FPGA board with DDR2 that I designed some time ago. I have reused that stackup elsewhere as well.
I hope someone finds it usefull.
Giannis.
Comments:
robertferanec, 07-31-2020, 06:31 AM
Thank you very much giannisasp
Armin , 08-18-2020, 06:37 AM
Hi dear Robert. I designed a 16 layer PCB. KU060 Xilinx FPGA with DDR4. I had 3G SDI with 75Ohm Impedance. I hope someday anyone can use.
milos.stankovic , 07-12-2022, 01:23 AM
Hi!
For 4L- board I used PWR/SIG at L1 and L4, with L2 and L3 as GNDs (one GND polygone or more, depending on number of GNDs). Guy from previous company suggested this stackup. Ric Hartley also mention it in https://www.youtube.com/watch?v=52fxuRGifLU with Robert. He mentioned that this stackup is good for digital boards, if I remember correctly. If there are sensitive tracks, they should be hidden inside the board, and with this stackup that is not possible.



Regards,
Miloš
Use our interactive Discord forum to reply or ask new questions.
Discord invite
Discord forum link (after invitation)

Didn't find what you were looking for?