U-boot Fec Address Problem

[robertferanec]

There are some basic env parameters which need to be set to be able to use Ethernet. Go to uBoot and try something like this (you may need to adjust the numbers based on your network settings):

setenv netdev eth0
setenv ethprime FEC0
setenv ethact FEC0
setenv ethaddr 00:01:02:03:04:05
setenv fec_addr 00:01:02:03:04:05
setenv ipaddr 192.168.0.150
setenv serverip 192.168.0.86
setenv gatewayip 192.168.0.1
saveenv

[necati]

Hi.
I am trying to configure ethernet on u-boot but it gives me an error which showed below. How can I fix this problem? Thanks.
Error: FEC address not set.