| FORUM

FEDEVEL
Platform forum

pcie

mostafa222 , 08-08-2017, 02:07 AM
Hi.i am designing a custom board with ti processor. it support a x2 pcie. I want to connect it to an pcie edge connector like one in picture below. But i cant find pinout and pcb spec of this connector. Please help me
alferdvidal , 08-08-2017, 06:56 AM
hi,Dear
this may halp you:https://www.digikey.com/products/en/...=0&pageSize=25

or datasheet : http://portal.fciconnect.com/Comerge...g/10118868.pdf

and you can search this name : card edge female connector
mostafa222 , 08-08-2017, 07:03 AM
Thanks. But i want to know the male edge connector pinout and signal name
alferdvidal , 08-08-2017, 08:30 AM
Hi,
If you want to get an outlet, you should ask the person who designed it to ask the connection point.
Because it examines what you want out of the output and the output point of the design is specified.
Regards
Alfred
robertferanec , 08-08-2017, 10:22 AM
Google for "pci express card electromechanical specification". Normally, a lot of specification documents can only be bought, but sometimes you may find something on internet e.g. this may help: http://read.pudn.com/downloads166/eb...ss_CEM_1.1.pdf
Use our interactive Discord forum to reply or ask new questions.
Discord invite
Discord forum link (after invitation)

Didn't find what you were looking for?