Routing only one DDR IC

[armin.salcin]

Hello Robert ,

I'm not sure how to route only one IC of DDR memory ,should i use t-branch topology or fly by and how to get t-branch when you don't have 2 ic or more , or i should use any other routing technique.

Thank you !

[mohsin_qau]

In the case of single DRAM, the topologies are dependent on Termination Resistors scheme. On the basis of your board size constraints, complexity and cost factor, you choose the best topology.

[robertferanec]

If you only have CPU connected to one memory chip, you just do direct CPU <-> Memory connection.

[armin.salcin]

If you only have CPU connected to one memory chip, you just do direct CPU <-> Memory connection.

Thank you for answer !