did you assign a color to the signal? find the signal in the left PCB panel and see if the color is not enabled
Very simple way to disable...
500 results in 0.1776 seconds.
-
I don't have Altium accessible right now, but:
- I think you will get ERC error (reference designator will be underlined by a red line) if you assign...Leave a comment:
-
This may help: How to create perfect PCB Footprint - What you really need to know https://youtu.be/cMxXea16HxcLeave a comment:
-
Just check symbol and footprint and look for pin 17. Often you will immediately see what the problem is.Leave a comment:
-
You can use filter and select for example all 0.1mm tracks and then change the width for all of them all at once in the properties panel. This video may...Leave a comment:
-
That is an interesting difference, but yes, it looks like there is not much to do - I had a look at PCBWay calculator and I am getting the same numbers....Leave a comment:
-
yes, exactly. for example you can build prototype with a quick PCB manufacturer and you can do mass production in china where every time they can send...Leave a comment:
-
Personally, I would not recommend to leave the track width decision on Altium - for multiple reasons.
This is what we often do: for all the...Leave a comment:
-
I would not use that chip (P82B715TD) unless you have a specific reason for it. As qdrives mentioned, by using transistors you can go from 3V3 to basically...Leave a comment:
-
qdrives thank you for all your answers. I found one of the videos where I was asking about this, I may do highlights from it: https://youtu.be/FM3pRM...Leave a comment:
-
I only suggested linkedin as I have seen some people promoting their work there. I do not have the premium, so I am not exactly sure how it works and...Leave a comment:
-
I often ask question about chemicals trapped inside of a via and if solder mask can trap air inside of a via. I was told, it's not really that bad. This...Leave a comment:
-
when you select a via, in Solder Mask Expansion, change it to Manual and check tented
...Leave a comment:
-
The simplest way to get some work is through your friends who are already working in a company which needs some help with design. Ask your friends, offer...Leave a comment:
-
Oh, you mean to change the order of the whole pair? Still the same, you may need to change layers.Leave a comment:
Leave a comment: