Hi Anlau ,
A general guideline is to have the paste layer at about 70% of pad size.
I have been using this for a while now and it is working...
168 results in 0.0180 seconds.
-
Community support for Cadence
Hello Folks,
I have moved to Cadence design suite lately and came to know that the community support cadence is quite limited.
Moreover they... -
Why some power supplies have Secondary side referencing to Ground??
Hello,
I have been looking at some power supply (AC to DC) circuit designs and there is at least one thing that has made me think "Why?"... -
Hi,
I would always tell my fab house if I have any controlled impedance.
As you said that tolerance are included while fabrication of the...Leave a comment:
-
Hi,
I used the Altium calculator for a 10 layers board and compared the data sent by the fabricator.
They were quite close in terms of trace...Leave a comment:
-
ZsoltFulop ,
The download files are for reference...
If you do a fresh PCB project and do every thing on your own it will enhance your skills...Leave a comment:
-
karimoviç ,
You can do this..
There are times when the off the shelf power supplies are not good enough and it is better to create a rectifier...Leave a comment:
-
hmoraghebi ,
Yes this is the correct sequence.
By this sequence you PCB will have the same primitives connected as you change in the schematic....Leave a comment:
-
GCopper ,
For locked parameter, Use the PCB Filter and enter "Locked" as keyword.
This will find all the locked components which...Leave a comment:
-
Hello Giayniod ,
For Model sim to work you need to Start with Change directory first and locate the directory where your Test bench file is kept...Leave a comment:
-
Hi karimoviç ,
FPGA as a device is different than Microprocessor or Microcontrollers.
Essentially it is a blank white board and you...Leave a comment:
-
Hi,
if you can be more specific on What you want to do?
Get the simulation results, Create a test bench, Generate a bitsteam file...
...Leave a comment:
-
GCopper
Whatever design u are using if it is locked, it can be unlocked as well if that's the case.
Can you kindly share the design if it...Leave a comment:
-
Hi k.ifantidis ,
Altium checks the rules within the routing layers and Does not detect rules for the Mechanical and other layers.
Even if...Leave a comment:
Leave a comment: